proxy-set
This command configures the Proxy Sets table, which lets you define Proxy Sets. The table is a parent of the Proxy Address table.
Syntax
(config-voip)# proxy-set <Index> (proxy-set-<Index>)#
|
Command |
Description |
|---|---|
|
Index |
Defines the table row index. |
|
accept-dhcp-proxy-list {disable|enable} |
Enables the device to obtain the Proxy Set's address(es) from a DHCP server using DHCP Option 120. |
|
classification-input {ip-only|ip-port-transport} |
Defines how the device classifies incoming IP calls to the Proxy Set. |
|
dns-resolve-method {a-record|ms-lync|naptr|not-configured|srv} |
Defines the DNS query record type for resolving the proxy server's host name (FQDN) into an IP address. |
|
fail-detect-rtx |
Defines the maximum number of UDP retransmissions that the device sends to an offline proxy, before the device considers the proxy as being offline. |
|
gwipv4-sip-int-name |
Assigns an IPv4-based SIP Interface for Gateway calls to the Proxy Set. |
|
gwipv6-sip-int-name |
Assigns an IPv6-based SIP Interface for Gateway calls to the Proxy Set. |
|
is-proxy-hot-swap {disable|enable} |
Enables the Proxy Hot-Swap feature, whereby the device switches to a redundant proxy upon a failure in the primary proxy (no response is received). |
|
keepalive-fail-resp |
Defines SIP response codes that if any is received in response to a keep-alive message using SIP OPTIONS, the device considers the proxy as down. |
|
priority <0-65535> |
Defines the priority of the proxy server. |
|
min-active-serv-lb |
Defines the minimum number of proxies in the Proxy Set that must be online for the device to consider the Proxy Set as online, when proxy load balancing is used. |
|
proxy-enable-keep-alive {disable|using-fake-register|using-options| |
Enables the device's Proxy Keep-Alive feature, which checks communication with the proxy server. |
|
proxy-ip |
Defines the Proxy Address table, which defines addresses for the Proxy Set. The table is a child of the Proxy Sets table. For more information, see proxy-ip. |
|
proxy-keep-alive-time |
Defines the interval (in seconds) between keep-alive messages sent by the device when the Proxy Keep-Alive feature is enabled (see the 'Proxy Keep-Alive' parameter in this table). |
|
proxy-load-balancing-method {disable|random-weights|round-robin} |
Enables load balancing between proxy servers of the Proxy Set. |
|
proxy-name |
Defines a descriptive name, which is used when associating the row in other tables. |
|
proxy-redundancy-mode {homing|not-configured|parking} |
Determines whether the device switches from a redundant proxy to the primary proxy when the primary proxy becomes available again. |
|
sbcipv4-sip-int-name |
Assigns an IPv4-based SIP Interface for SBC calls to the Proxy Set. |
|
sbcipv6-sip-int-name |
Assigns an IPv6-based SIP Interface for SBC calls to the Proxy Set. |
|
srd-name |
Assigns an SRD to the Proxy Set. |
|
success-detect-int |
Defines the interval (in seconds) between each keep-alive retries (as configured by the 'Success Detection Retries' parameter) that the device performs for offline proxies. |
|
success-detect-retries |
Defines the minimum number of consecutive, successful keep-alive messages that the device sends to an offline proxy, before the device considers the proxy as being online. |
|
tls-context-name |
Assigns a TLS Context (SSL/TLS certificate) to the Proxy Set. |
|
weight <0-65535> |
Defines the weight of the proxy server. |
Command Mode
Privileged User
Example
This example configures proxy keep-alive and redundancy:
(config-voip)# proxy-set 0 (proxy-set-0)# proxy-enable-keep-alive using-options (proxy-set-0)# is-proxy-hot-swap enable (proxy-set-0)# proxy-redundancy-mode homing (proxy-set-0)# activate